Lucasfilm Custom Of The Week: 1:12 Indiana Jones and the Treasure of the Aztecs By Hemble Creations

Bespin refugee - January 21, 2024


Hi All,

Indiana Jones and the Treasure of the Aztecs - 1:12 scale.


Figure - is Indy from the Hasbro Indy adventure series and I glued and covered the joints and painted and weathered him using Vallejo Paints and Pastel Chalks.
Base - is MDF foam which was cut to shape and then I used individual pieces of thin foam to make the stones and glued them in place. I then went around with a pencil and added cracks and then I used a piece of sandstone and pressed it into the foam.
The pots/statues/coins/medallion were resized and printed on my 3D resin printer and they were then sanded and painted and attached to the base.
I added dirt to the base and spread it out to fill in the gaps and then added watered down PVA glue to keep it in place. The moss was done using sand/green paint/watered down PVA glue and applied with a small brush and then I added the coins


Check out more images of their custom below in our GALLERY!

If you would like to submit your own custom figure(s) to be displayed on JediInsider.com, be sure to check out our Custom Forum section, where you can discuss and show off your work among other customizers.
Image 1 of 9
1 of 9
Image 2 of 9
2 of 9
Image 3 of 9
3 of 9
Image 4 of 9
4 of 9
Image 5 of 9
5 of 9
Image 6 of 9
6 of 9
Image 7 of 9
7 of 9
Image 8 of 9
8 of 9
Image 9 of 9
9 of 9



STAR WARS SHOPPING ONLINE


Advertise Here on JediInsider.com

Search Online Stores for Indiana Jones customs



Toys Shopping Oniine





Comments...

Last 10 comments - ( Read All Posts )
Bespin refugee - 2024-01-21 @ 6:48 pm

Hi All,Indiana Jones and the Treasure of the Aztecs - 1:12 scale.Figure - is Indy from the Hasbro Indy adventure series and I glued and covered the joints and painted and weathered him using Vallejo Paints and Pastel Chalks.

Base - is MDF foam which was cut to shape and then I used individual pieces of thin foam to make the stones and glued them in place. I then went around with a pencil and added cracks and then I used a piece of sandstone and pressed it into the foam.

The pots/statues/coins/medallion were resized and printed on my 3D resin printer and they were then sanded and painted and attached to the base.

I added dirt to the base and spread it out to fill in the gaps and then added watered down PVA glue to keep it in place. The moss was done using sand/green paint/watered down PVA glue and applied with a small brush and then I added the coinsCheck out more images of their custom below in our GALLERY!If you would like to submit your own custom figure(s) to be displayed on JediInsider.com, be sure to check out ourCustom Forum section, where you can discuss and show off your work among other customizers.

Bespin refugee - 2023-12-03 @ 6:47 pm

'Indiana Jones And The Mystery Of The Blues'ByHemble Creations"Hi All,Indiana Jones and the Mystery of the Blues, Custom 1:12.Recipe.Indy - is from Hasbro and I added the beard with putty and the jumper/scarf/tie were all made using a dried baby wipe and the buttons on the jumper are pieces of plastic.The sax I 3D printed which isn't great as I used to many supports but it will do until I print a new one and the whip is the uncoiled whip which comes with the figure, and I just coiled it and superglued it."

Satam - 2023-07-02 @ 5:39 pm

Not really the right Indy for the club, but the club exterior looks very good.

Bespin refugee - 2023-07-02 @ 1:49 pm

1:12 Club Obi-Wan (Indiana Jones And The Temple Of Doom)byHemble Creations"Recipe.Diorama - the building is a 3D PLA kit from In Print Condition https://www.facebook.com/profile.php?id=100065277600673 and I got it printed from Syndicate Custom https://www.facebook.com/profile.php?id=100082987609768 and it comes in pieces so there is a little sanding and then gluing.I painted with Vallejo paints, the tassels on the lantern are just pieces of string and dyed in red paint. The plants in the pots are from Woodland Scenics and posters I printed off the net and the frame work is made from plastic strip."Check out more images of their custom below in our GALLERY!If you would like to submit your own custom figure(s) to be displayed on JediInsider.com, be sure to check out ourCustom Forum section, where you can discuss and show off your work among other customizers.

Satam - 2023-05-28 @ 8:52 pm

Absolutely brilliant diorama

Bespin refugee - 2023-05-28 @ 5:45 pm
"I've Got A Bad Feeling"ByHemble CreationsHi All," I've got a bad feeling" 7 inch scale.Recipe.Figure/dio - is a 3D print which I got from Hex3D over on his Patreon page https://www.patreon.com/Geoffro and again a huge thanks to Syndicate Customs for printing this out for me. The base and Solo in carbonite are PLA printed and Indy is resin printed and I painted everything using Vallejo Paints.The dirt is garden mulch which I throw into a blender and mulch it up until it's like a sandy/dust texture and then I apply it and once dry I use Vallejo's Chocolate Brown and give it a wash over. The grass is from Model Scene and the vines I get off ebay.Check out more images of their custom below in our GALLERY!If you would like to submit your own custom figure(s) to be displayed on JediInsider.com, be sure to check out ourCustom Forum section, where you can discuss and show off your work among other customizers.

Bespin refugee - 2023-04-23 @ 1:53 pm

6 Inch Indy & The Golden IdolByHemble CreationsRecipe.Indy - is a repainted 6" figure from the new Hasbro line and I used Vallejo Paints and pastels to paint and weather him and the gold comes with the figure but there is no hair detail on the back so I used a model knife and added the hair.idol base - is printed by https://syndicatecustoms.com.au/ and I painted and weathered is using Vallejo paints and pastel chalks and the foliage is from Model Scene and I just pulled apart what I needed and glued it in place.Check out more images of their custom below in our GALLERY!If you would like to submit your own custom figure(s) to be displayed on JediInsider.com, be sure to check out ourCustom Forum section, where you can discuss and show off your work among other customizers.

Ace1o8 - 2021-03-09 @ 11:34 pm

Mola Rom, prepare to meet Kali, in Hell!!!!

Bespin refugee - 2021-03-08 @ 7:13 pm
"...the figures are from Hasbro and the ladder is made from balsa wood and string and the stone wall is a piece of old plastic fake rock used for model railways."Click hereif you would like to submit your own custom figure(s) to be displayed on JediInsider.com, and be sure to check out ourCustom Forum section, where you can discuss and show off your work among other customizers.
Satam - 2019-07-22 @ 7:58 pm

Yeah, I really hope they put out a Toybox Indy.

Post Your Comment Now! (membership required)



More Custom Toys & Art News


Advertise on Jedi Insider


STAR WARS REVIEWS

Toy Photography

Movies & TV

Customs

Games



This site uses cookies for site configuration, advertising, and analysis. By using this site you accept our policies - Read Full Site Policy OK
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Forums Communities: Toy Fans - Marvel Fans - Transformers Fans

@ToyNewsI Socials: Facebook - Twitter - Instagram

@MarvelousNews Socials: Facebook - Twitter - Instagram

@Tformers Socials: Facebook - Twitter - Instagram

@JediInsider Socials: Facebook - Twitter - Instagram

Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE